Filling gaps in paving may seem like a tedious job, but with Joint-It, the process is surprisingly simple. Whether you’re dealing with worn-out joints or just want to refresh the look of your paved area, Joint-It makes it easy for both DIYers and professionals alike. In this guide, we’ll walk you through everything you need to know about using Joint-It to fill gaps in paving quickly and effectively.
Google Joint-it if you don’t know what it is, but essentially it is one of many brush in products used to refill paving gaps. Gaps have to be a minimum of 3mm wide & 25mm deep so it’s not used for small block paving.
There are many similar products but we have fount Joint-It to be very easy to use and long lasting. It makes the refilling of paving gaps a simple process.
Why Fill Gaps in Your Paving?
Over time, gaps in paving can appear due to weather exposure, heavy foot traffic, and general aging. When left unattended, these gaps can lead to weed growth, water penetration, and structural instability. Filling the gaps with a high-quality product like Joint-It ensures durability and a clean, polished look.
Benefits of Using Joint-It:
Easy to Apply – No need for complex tools or professional expertise.
Weather-Resistant – Designed to withstand the elements.
Strong & Durable – Helps prevent shifting and weed growth.
Permeable – Allows water drainage to prevent pooling.
Fast Drying – Saves time compared to traditional grout methods.
What You Need:
Before you get started, gather the following materials:
Joint-It paving grout
A stiff brush or broom
A watering can or hose
Protective gloves (optional but recommended)
Step-by-Step Guide to Filling Gaps in Paving with Joint-It
Step 1: Prepare the Surface
Ensure that your paving area is clean and free from debris. Use a stiff brush or broom to remove dirt, dust, and any loose material from the gaps. If weeds have started to grow in the gaps, remove them completely before proceeding. Ideally, we recommend a good power wash for best results.
Step 2: Dampen the Area
Before applying Joint-It, lightly dampen the paving stones and gaps with a hose or watering can. Avoid over-saturating the area, as excessive water can interfere with the grout’s adhesion.
Step 3: Pour the Joint-It Grout
Evenly distribute the Joint-It paving grout over the gaps. Using a brush again push the grout into the gaps, ensuring all spaces are filled completely. Work in small sections to maintain control over the process.
Step 4: Remove Excess Grout
Once the gaps are filled, sweep away any excess grout using a soft broom. Be careful not to remove grout from the gaps during this step. Light pressure with a blower can also help clear excess material without disturbing the joints.
Step 5: Mist the Surface
After sweeping, lightly mist the surface with water. This step helps to activate the grout’s setting process and ensures proper bonding.
Step 6: Allow to Set
Let the grout dry according to the manufacturer’s instructions. Typically, Joint-It sets within a few hours, but full curing may take up to 24 hours depending on weather conditions.
Step 7: Final Cleaning
Once fully dry, give your paving area a final sweep to remove any remaining residue. Your paving should now have a fresh, revitalized look with strong, durable joints.
Maintenance Tips for Long-Lasting Results
Regular Cleaning – Sweep and rinse your paving area frequently to prevent dirt buildup.
Weed Control – Occasionally inspect the gaps and remove any new weed growth.
Reapply as Needed – If you notice any gaps forming over time, simply repeat the process to maintain strong joints.
Conclusion
Filling gaps in paving with Joint-It is an easy, effective way to extend the life of your paved surfaces while keeping them looking great. Whether you’re a DIY enthusiast or a professional landscaper, Joint-It makes the job quick and hassle-free. So why wait? Give your paving a fresh, new look today!
And, of course, if you’re in the Belfast or Lisburn areas and would rather we did this for you, just give us a call.
For more expert tips and product recommendations, stay tuned to our blog!
